Ödeme & teslimat koşulları:
|Feeder:||letf: 29pcs; right:29pcs , total 58pcs||Placement head:||2pcs|
|Nozzles:||4 Juki Nozzles||speed:||3000cph with v0.025mmision; without vision 5000cph|
|accuracy:||0.025mm||pcb clamping area:||10mm*10mm - 355mm*355mm|
automatic pick and place machine,
surface mount technology machine
58pcs Feeders Vision Camera CHMT48VB Charmhigh Tabletop Pick and Place Machine, Prototype Small Batch production
Advanced Pick and Place Machine 110v 220V English Version CE Passed
|PCB area||10mm*10mm - 355mm*355mm|
|X Y axis Travel||420*460mm|
|Z axis moving range||15mm|
|Feeders||Left 29pcs + right 29pcs
8mm=44pcs, 12mm=8pcs, 16mm=4pcs, 24mm=2pcs,
Front IC stack=14pcs, user-defined IC tray
|Vision system||Dual cameras (up & down cameras)|
|Drive||Closed-loop control stepper servo drive system, make sure never lose step|
|Z axis self-return detection||Yes, prevent nozzles breaking|
|Pull pin self-return||Yes|
|Leakage of material detection method||Vacuum detection, vision detection|
|Touch screen||7”industry touch screen (USB mouse supprted)|
|Main board||Independent research industry main board|
|System||Embedded Linux system|
|Mounting speed||5000cph (vision off); 3000cph (vision on)|
|Components||0402-5050,SOP,QFN (tape width: 8MM,12MM,16MM,24MM)|
|Machine dimension||L 960mm* W 705mm* H 335mm|
|Vacuum pump||-92KPA (2pcs,build-in, mute type)|
|External air source||No need (machine build-in mute vacuum pump 2pcs)|
|External PC||No need , this is all-in-one machine|
|Voltage||220V (110V), 50Hz|
|Support software||Altium designer,Protell99SE,PADS,Kicad,Eagle,Cadint,Cadence Orcad,Cadence Allegro,PROTEUS..etc|
|Gross weight||84kg / 118*80*52cm / 0.49m³|
1. Convenient software, Embedded Linux System of the machine, industry system, more professional and stable, independent operation, no need external computer, operation more easy and convenient.
2. Industry full touch screen operation, no need external screen, room saved, more convenient operation, USB mouse supported as well.
3. Top and bottom two cameras CCD system correct the position of each components very accurate,especially for IC.
4. It has flexible PCB clamping fixture, and it has user-defined IC tray, convenient and quick.
5. The vision also can second correction machine origin point, make sure origin point correct.
6. With two nozzles placing heads, high precise Juki Nozzles with magnet, no need to disassemble with wrench. 2 nozzles arbitrary rotation angle -180 degree~ +180 degree. Placing height can adjustable.
7. Pull pin automatically return to avoid nozzles broken, pull pin not be stuck, big progress.
8. Z axis detection, placement head can auto back to origin to prevent nozzles broke.
9. Closed-loop contro, X,Y Axis with encoder, never loose steps.
7. PCB by calibrate two components position ---- first and last componet, amend the offset of PCB.
8. Calibration can be rapidly and accurately for PCB, do not need to care about offset, no need to calculate the input.
9. Comes iwth vacuum testing, with automatic feeding; if one component suck crooked, it will automatically throw it to the feed zone, then pick a new one to mount again.
10. If lack material it will automatic detection, machine will alarm and stop; after supply material, then continue working, no need to re-start.
11. Support any number of PCB batch.
12. If no PCB file, or don’t you don't have work file, you can creat a new file to program in machine directly.
13. Support single step.
Why choose Charmhigh?
1.Professional desgin and room saved.
2.User friendly operation, no need professional SMT engineer, entry-level device
3.One machine - Integrated operation, no need extra pump or PC or any supporting facility
4.High accuracy and reliability,make up the defection of manual work
5.Cost efficient, reduce expense to own a professional automatic SMT production line
6.International express with door to door service,3-5 working days delivery
7.Especial for laboratory research and development,samples,to avoid any patents and designs revealment.
8.One machine equal to 5 soldering staff, easy manage and cost-saved. Good for small batch production.
9.Charmhigh Is factory supply, all of our machines parts are researched and manufacturing by ourselves. After-service spare parts never stop.
10. Charmhigh is a professional manufacturer of SMT Pick and Place machine since 2009. All the software are researched by ourselves.
Standard Accessories for CHMT48VB:
1) Pick and Place MachineCHMT48VB: 1
2) Juki nozzle: Totally 4pcs (503, 504, 505, 506 size)
3) 8G USB flash 1
4) Power Cord: 1
5) Pull pins: 2
6) Coil for pull pin:1
7) Grease: 1
8) Hex wrench: 6
9) Tweezers: 1
10) Brush: 1
11) English user manual: 1
The complete machine has a warranty period of 1 year from the time of purchase and lifelong service
support as well as a long term factory price supply.
We provide online Q/A and troubleshooting support and technical advice service. Provide one to one after-sale service.
Each machine 100% test well before sent out.
Kimi Mob: 0086 135 106 75756
Skype: kimiliu89 .
If you want to see more information and videos, please contact us by E-mail.
We will response you at the first time.
İlgili kişi: Ms. Kimi Liu
Tel: +86 135 106 75756 / +86 131 0721 9945